r1ch.net forums
* Home Help Search Login Register
r1ch.net  |  r1ch.net stuff  |  R1Q2  |  Topic: Sensitivty
Pages: [1]
Print
Author Topic: Sensitivty  (Read 2429 times)
awc
Member

Posts: 5


« on: February 15, 2007, 10:36:58 pm »

Hello R1ch and group,have a small problem,when i play on worms ctf server my sensitivity changes to 15 or 11 from where i have it set to 30 in all my configs and r1q2 setting as well,but it drops.Not sure if its setup that way on the server or the program has a glich in it.I also notice my rate changes form 25000 to 15000,again not sure if its the server or a glich.Now this only changes in the one q2 config not my personal one.Anyways keep up the good work.

awc
Logged
R1CH
Administrator
Member

Posts: 2625



« Reply #1 on: February 15, 2007, 11:57:40 pm »

The rate capping is most likely done by the server, although with Q2 packet rate there is no difference between 15000 and 25000.

The sensitivity must be coming from one of your config files, unless you have the sensitivity set in your autoexec.cfg, it may be overridden by the defaults from config.cfg. Depending on how you connect, it may switch from baseq2 -> ctf, thus using the sensitivity from ctf config.cfg when you normally had it set correctly in baseq2 config.cfg. I suggest you put the settings you wish to keep in autoexec.cfg as Q2's config.cfg system can be a little tricky at times.
Logged
awc
Member

Posts: 5


« Reply #2 on: February 16, 2007, 02:56:31 am »

I decide to leave it at 15 and live with it.Keep up the good work

awc
« Last Edit: February 16, 2007, 07:07:17 am by awc » Logged
Pages: [1]
Print
r1ch.net  |  r1ch.net stuff  |  R1Q2  |  Topic: Sensitivty
Jump to:  

Powered by SMF 1.1.19 | SMF © 2013, Simple Machines